GET FREE $100 Welcome Offer
BUY AND SELL BTC, BNB, CAKE, DOGE, ETH AND 27 MORE
BUY AND SELL BTC,
BNB, CAKE, DOGE
ETH AND 27 MORE

Intel Celeron N4020 vs Intel Atom D2560

Intel Celeron N4020

The Intel Celeron N4020 operates with 2 cores and 2 CPU threads. It run at 2.80 GHz base 2.70 GHz all cores while the TDP is set at 6 W.The processor is attached to the BGA 1090 CPU socket. This version includes 4.00 MB of L3 cache on one chip, supports 2 memory channels to support DDR4-2400LPDDR4-2400 RAM and features 2.0 PCIe Gen 6 lanes. Tjunction keeps below -- degrees C. In particular, Gemini Lake Architecture is enhanced with 10 nm technology and supports VT-x, VT-x EPT, VT-d. The product was launched on Q4/2019

Intel Celeron N4020

The Intel Atom D2560 operates with 2 cores and 2 CPU threads. It run at -- base -- all cores while the TDP is set at 10 W.The processor is attached to the BGA 559 CPU socket. This version includes 1.00 MB of L3 cache on one chip, supports 1 memory channels to support DDR3-1066 RAM and features PCIe Gen 4 lanes. Tjunction keeps below 100 °C degrees C. In particular, Cedarview Architecture is enhanced with 32 nm technology and supports None. The product was launched on Q4/2012


Compare Detail

1.10 GHz Frequency 2.00 GHz
2 Cores 2
2.80 GHz Turbo (1 Core) --
2.70 GHz Turbo (All Cores) --
uncheck No Hyperthreading Yes check
uncheck No Overclocking No uncheck
normal Core Architecture normal
Intel UHD Graphics 600 GPU Intel GMA 3650
0.65 GHz GPU (Turbo) No turbo
10 nm Technology 32 nm
0.65 GHz GPU (Turbo) No turbo
12 DirectX Version 10.1
3 Max. displays 2
DDR4-2400LPDDR4-2400 Memory DDR3-1066
2 Memory channels 1
Max memory
uncheck No ECC No uncheck
-- L2 Cache --
4.00 MB L3 Cache 1.00 MB
2.0 PCIe version
6 PCIe lanes 4
10 nm Technology 32 nm
BGA 1090 Socket BGA 559
6 W TDP 10 W
VT-x, VT-x EPT, VT-d Virtualization None
Q4/2019 Release date Q4/2012

Cinebench R15 (Single-Core)

Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.

23% Complete
0% Complete

Cinebench R15 (Multi-Core)

Cinebench R15 is the successor of Cinebench 11.5 and is also based on the Cinema 4 Suite. Cinema 4 is a worldwide used software to create 3D forms. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.

1% Complete
0% Complete

Geekbench 5, 64bit (Single-Core)

Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The single-core test only uses one CPU core, the amount of cores or hyperthreading ability doesn't count.

22% Complete
0% Complete

Geekbench 5, 64bit (Multi-Core)

Geekbench 5 is a cross plattform benchmark that heavily uses the systems memory. A fast memory will push the result a lot. The multi-core test involves all CPU cores and taks a big advantage of hyperthreading.

2% Complete
0% Complete

iGPU - FP32 Performance (Single-precision GFLOPS)

The theoretical computing performance of the internal graphics unit of the processor with simple accuracy (32 bit) in GFLOPS. GFLOPS indicates how many billion floating point operations the iGPU can perform per second.

1% Complete
0% Complete

Estimated results for PassMark CPU Mark

Some of the CPUs listed below have been benchmarked by CPU-Comparison. However the majority of CPUs have not been tested and the results have been estimated by a CPU-Comparison’s secret proprietary formula. As such they do not accurately reflect the actual Passmark CPU mark values and are not endorsed by PassMark Software Pty Ltd.

Intel Celeron N4020 1,568 (1%)
1% Complete
Intel Atom D2560 712 (1%)
1% Complete
Electric Usage Estimate

Electric Usage Estimate

Electric Usage Estimate

Electric Usage Estimate

Intel Celeron N4020 Intel Atom D2560
6 W Max TDP 10 W
NA Power consumption per day (kWh) NA
NA Running cost per day NA
NA Power consumption per year (kWh) NA
NA Running cost per year NA

Comments

back to top